Перейти к основному содержимому

6.3.39 show ip ospf

Назначение команды​

Для отображения общей информации о процессе маршрутизации Open Shortest Path First (OSPF) используется команда show ip ospf.

Синтаксис команды​

show ip ospf ( PROCESS-ID | )

Параметры​

ПараметрОписание параметраДопустимые значения
PROCESS-IDЛокальный идентификатор процесса маршрутизации OSPF, назначаемый вручную0–65535

Режим команды​

Privileged EXEC

Примеры​

Ниже приведён пример вывода команды show ip ospf:

Switch# show ip ospf  
 Routing Process "ospf 100" with ID 11.11.11.11  
 Process uptime is 0 minute  
 Process bound to VRF default  
 Conforms to RFC2328, and RFC1583 Compatibility flag is disabled  
 Supports only single TOS(TOS0) routes  
 Supports opaque LSA  
 SPF schedule delay 5 secs, Hold time between two SPFs 10 secs  
 Refresh timer 10 secs  
 Number of incomming current DD exchange neighbors 0/5  
 Number of outgoing current DD exchange neighbors 0/5  
 Number of external LSA 0. Checksum 0x000000  
 Number of opaque AS LSA 0. Checksum 0x000000  
 Number of non-default external LSA 0  
 External LSA database is unlimited.  
 Number of LSA originated 1  
 Number of LSA received 3  
 Number of areas attached to this router: 1  
    Area 1  
        Number of interfaces in this area is 1(1)  
        Number of fully adjacent neighbors in this area is 1  
        Number of fully adjacent virtual neighbors through this area is 0  
        Area has no authentication  
        SPF algorithm last executed 00:00:38.995 ago  
        SPF algorithm executed 1 times  
        Number of LSA 4. Checksum 0x0235ff